Transport:
When lifting the machine or moving it, take sufficient safety measures so that no dropping accidents will occur.

Unpacking:
1, Read all instructions shown on the transport-use container.
2, Never cut tapes with a cutter.
3, Retain delivery -use materials.

Installation:
1, To prevent the occurrence of any accident due to unintended moving of the machine in operation, make casters float using a height adjuster.
2, Install this machine at a flat position.
3, To prevent the occurrence of electric shock, power leakage, or fires, use attached products regarding cables, and link them to the specified positions.
4, To prevent electric shock, power leakage, or fires, make sure that irrational force will be applied to the cables while the machine is in operation.
5, Securely fix the power supply plug and the connector of an I/F cable, When drawing out the power supply plug or the I/F cable, do it by holding the connector unit.

Before operation:
1, To prevent accidents to human bodies, make sure before supplying power that there is no damage, coming off of parts, or loosening of connectors and cables.
2, To prevent bodily accidents, never put in your hand into the driving unit.

Greasing:
1, Regarding greasing, use Albania Grease.
2, To prevent the occurrence of an inflammation or rash, immediately wash the related portions if grease adheres to your eyes or other parts of your body.
3, If grease is mistakely swallowed, immediately consult a physician to prevent diarrhea or vomitting.

Maintenace:
1, To prevent accidents due to unaccustomedness, repair and adjustment shall be conducted by maintenance engineers who are versed in the machine, In replacing parts, use genuine parts of our company. 
2, To prevent accidents or electric shock due to unaccustomedness, entrust electrical repair or maintenance work(including wiring work) to persons versed in electricity, or as engineers of our company or its sales company to do it.
3, To prevent accidents due to unintended start-up of the machine, conduct repair or adjustment only after removing air supply pipes and discharging residual air.
4, To prevent bodily accidents, confirm after such work as repair, adjustment, or parts replacement that no screws or nuts are loosened.

Use Enviroment:
1, Use the machine in the enviroment free from effects of noise sources(magnetic waves), such as high-frequency welders, in order to prevent accidents due to erroneous actions.
2, In order to prevent accidents due to erroneous actions, do not use the machine in the enviroment where the specified source voltage surpasses the specified one +-10%.
3, In order to prevent accidents due to erroneous actions, do not use the machine in the enviroment where the supplied air pressure is 0.5+-0.05Mpa.
4, To ensure safety, use the machine under the following environment:

Ambient temperature during operation +10 degree - +35 degree
Relative humidity during operation        50% or less(35 degree). 90% or less (20degree)
5, To prevent accidents due to breakdown of electric/ electronic parts, turn on power supply sufficiently after the fear of dew condensation is elimiated, because such sondensation may occur when the machine is rapidly moved from a cold place to a warm location.
6, To prevent accidents due to breakdown of electric/ electronic parts, stop the use of the machine during lighting, and draw out the power supply plug.