-
Notes on JUKI Promixmity Sensor
An FX-1 Machine has a proximity sensor on L-head, take care to keep away tools, watches, etc. from the sensor. The proximity sensor is used to prevent the interference between the left and right head. Once the proximity sensor detects a metal object that [Read More] Mar 15, 2022
-
FX-1 / FX-1R system configuration
FX-1/FX-1R Machine 1, Power Unit. - Emergency stop button 2, CPU Board -liquid crystal display (LCD) -HOD -Keyboard -Track ball -FDD -Flash Memory disk -100 base/ 10 base ethermet board -printer port -Touch panel - Rear side operation unt =UPS 3, I/O Cont [Read More] Mar 15, 2022
-
Introduction of FX-1 / FX-1R Machine
This Machine, FX-1 / FX-1R is a high-speed modular machine, and its mounting capability allows you to place components on a board at double the speed a conventional medium-sized modular machine, KE-2050 does. Thia machine is a one-by-one type of mounter a [Read More] Mar 15, 2022
-
Matters of caution for safe use of FX-1/FX-1R
1, To prevent accidents due to electric shock, do not open the electrical equipment box while power supply is on. 2, To Prevent electric shock, do not operate the machine, with the grounding line unlinked. 3, To prevent damage to human bodies, do not oper [Read More] Mar 15, 2022
-
Matters of caution at Each of its use stages
Transport: When lifting the machine or moving it, take sufficient safety measures so that no dropping accidents will occur. Unpacking: 1, Read all instructions shown on the transport-use container. 2, Never cut tapes with a cutter. 3, Retain delivery [Read More] Mar 15, 2022
-
Situations in which it is necessary to turn off power supply
Situations in which it is necessary to turn off power supply 1, In the case of an abnormality or an accident, or in the event of power failure, immediately turn off power supply. 2, In order to prevent accidents due to unintended start-up of the machine, [Read More] Mar 15, 2022
-
Warning for the safe operation of machinery
All personnel engaged in the operation of the chip placer and its accessories (here after refered to as machine) including the operators, services and maintenance personnel are required to read through this safety warning to make familiar with its handlin [Read More] Mar 15, 2022
-
Mark (BOC Mark/ Area Fiducial Mark) Recognition Errors
1, A mark is stained. Manage marks so that they cannot bestained. Set the noise cut level of a mark again. 2, Data entry error of the X and Y coordinates of a mark. Specify the X and Y coordinates of a mark again. If you change the oordinates of a mark, t [Read More] Mar 15, 2022
-
Why the system cannot measure a component?
Why the system cannot measure a component? There are three reasons: 1, The length and width of a component are set oppositely. Enter the width and Length fields correctly with taking consideration into the component supply angle. 2, The surface of the las [Read More] Mar 15, 2022
-
A component placement position is outside a PWB(or circuit)?
A component placement position is outside a PWB(or circuit)? Data entry error in the PWB Layout offset or circuit layout offset field on the PWB data screen. Set the PWB layout offset or Circuit layout offset field again so that coordinates of a compo [Read More] Mar 15, 2022
Professional Supplier Of SMT Spare Part& SMT Machine & SMT Peripherals
Address : Building A,TianYou Industrial Park, FuYong,ShenZhen,GuangDong ,China
Email : info@kingfeismt.com
Email : info@kingfeismt.com
